Sharp SL-6000L Manual page 79

Caution:
• Only insert the card after the start-up routine has been completed (the
keyboard and other function keys will be fully operational) after the power is
turned on. If the card is inserted before the start-up routine is completed, the
Zaurus will not properly recognize the card, and may result in improper
operation.
• Do not subject the card to strong electrical shocks.
• Insert the SD memory card and the Multi Media Card into the slot until they
are completely inserted.
Note:
• The Zaurus will take longer to start up when it has a memory card installed
compared to when it does not. This is because the system will check the card
at startup.
• Sharp recommends that you only use the memory cards that have been
approved by Sharp. Use of other cards may not work properly with the
Zaurus.
Removing
1.
Be sure all applications are closed before removing the card.
If any applications are open, tap
2.
While the card is inserted, tap the CF (or SD) card icon on the taskbar.
The pop-up menu will appear.
3.
Tap "Eject CF card" (or "Eject SD-card").
The CF (or SD) card icon will disappear.
At the same time, the memory card folder will be erased from the Files Home
screen.
Now you are ready to remove the card from the CF (or SD) card slot.
to close them.
SD card icon
CF card icon
77
Basic Operations