Replacing The Battery Pack - Sharp SOLAR SH007 User Manual

Replacing the Battery Pack

■
Removing the Battery Pack
➡
Move the lock slider in the direction of the arrow.
➡
Remove the battery pack cover by hooking
a fingertip (nail) on the concave portion and
lifting it up in the direction of the arrow.
➡
Remove the battery pack by pulling up on the
PULL tab.
2
1
Concave portion
Lock slider
■
Attaching the Battery Pack
➡
With the PULL tab of the battery pack facing
up, align the contacts on the battery pack with
those of the cell phone and then insert the
battery pack securely.
➡
Insert the tab of the battery pack cover into the
groove of the cell phone ( A ), and then close
the battery pack cover properly ( B ).
➡
Press along the edges of the battery pack
cover in the direction of the arrows to make
3
PULL tab
Battery pack
sure that there is no gap between the cover
and the cell phone.
➡
Move the lock slider to the "LOCK" position in
the direction of the arrow.
1 2
PULL tab
Contacts
3 4
• When removing the battery pack, always pull up on
the PULL tab. Doing otherwise may result in damage
to the contacts.
• When removing the battery pack, turn the cell phone
power off.
• Before attaching the battery pack, make sure that the
au IC-Card is inserted.
• When attaching the battery pack, make sure that the
battery pack cover is closed properly so that it does
not open so as to maintain water resistance.
• Failure to follow the correct procedure when removing
or attaching the battery pack may result in damage to
the battery pack or the battery pack cover.
B
A
Lock slider
9