Connecting The Zaurus To Your Pc - Sharp SL-6000L Manual

32
About Your Zaurus

Connecting the Zaurus to your PC

Using the Docking Station, you can connect to a PC and exchange files and data.
Refer to the PC operation manual for more information regarding connections.
1.
Connect the USB connector of the Docking Station to the USB port of the PC.
2.
Follow the instructions in Steps 1 through 4 of "Charging using the Docking
Station" above to connect the AC adapter and Zaurus to the Docking Station.
Note:
• Before step 1, be sure to turn the PC power on.
• When the Security application is set on Zaurus, turn the Security setting off
(in this status, entering the passcode becomes unnecessary at power-on)
before connecting to the PC (see the section on "Security" in the Operation
Manual on the CD-ROM).
• While communicating with the PC, do not perform any operations on the
device, turn off its power, remove it from the Docking Station, or disconnect
the cable from the PC.
• While communicating with the PC, the AC adapter must be connected.
• If the device has been removed from the Docking Station, make sure to wait
for 30 seconds before replacing it on the Docking Station.
If connected immediately after the device is removed, the device may not be
properly recognized as a USB device.
• Do not remove and re-connect the USB cable from/to the PC in a short time.
PC
USB port
USB connector
Docking Station