Sharp SL-6000L Manual page 48

46
Basic Operations
Application Fast Load
Some applications may take a while to launch when there is a large amount of data
associated with the application. There are some applications which you can reduce
the start up time by using the settings on the "Details" screen. (To open the "Details"
screen, tap and hold an application icon for a few moments in the Applications Home
screen.)
If you check the "Fast load" option in the "Details" screen, the start up time for that
application will be shortened. (There are also some applications that do not have the
Fast load checkbox.)
Note:
• Selecting the Fast Load option will consume more memory. Limited available
memory may cause the launch time to slow down.
• Even when "Fast Load" is enabled, the first time to launch the application may
not be as fast as subsequent times.
• You can disable the "Fast Load" application by removing the checkbox on the
details screen.
• When "Fast Load" is checked off, note that the ordering of the list has not be
resumed. If you change the ordering of the list again, tap column buttons.
Viewing data (Index screen/Detail screen)
1.
Start the Todo List application.
The Index screen will be displayed and the entries can be viewed in list form.
Category name
Application name
You can change the
width of the columns
by touching and
dragging here with the
stylus (not available
for some columns).
2.
Press the Up or Down cursor key to move the focus to the desired entry.
3.
Press the OK key.
The Detail screen of the entry will be displayed.
You can change the list
order by tapping on the
column buttons.