Connecting Gx293 To Your Pc; System Requirements; Gsm/Gprs Modem - Sharp GX293 Manual

Connecting GX293 to Your PC

You can use the following functions by connecting the GX293
to your PC using a USB port* or
port:

• GSM/GPRS modem

• Handset Manager for GX293
Bluetooth
• wireless connection
* Requires an optional USB data cable for USB port
connection.

System Requirements

Operating System: Windows
®
2000**, Windows XP***
®
Windows 98 Second Edition, Windows
*
Pack 1 with Internet Explorer 5.01 or later
** Service Pack 4
*** Service Pack 1a
Supported Software:
®
Microsoft Outlook/Outlook Express
Bluetooth
Interface: USB port or
CD-ROM drive
Bluetooth
wireless technology
® ®
98*, Windows Me, Windows
®
98 Service
wireless Port
GSM/GPRS Modem
You can use GX293 as a GSM/GPRS modem to access the
Internet from your PC. Connect your phone to your PC via
Bluetooth
wireless technology or USB interface. Software
installation on your PC is required. For details, see "Software
Installation" on page 118.
Modem via the USB Cable
To use the modem function using a USB cable, use the cable
mentioned above and see the instructions accompanying the
cable.
Modem via Bluetooth connection
To use the modem function via
®
interface, see "Using the Bluetooth Wireless Function" on
page 109 and turn the modem function on.
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible whilst
communicating with the Handset Manager via Bluetooth
wireless technology or USB interface.
Bluetooth
wireless technology
Connecting GX293 to Your PC 117