Remote Management - TP-Link Archer C8 User Manual

Ac1750 wireless dual band gigabit router
Hide thumbs Also See for Archer C8:
Table of Contents

Advertisement

use the password to browse the built-in web pages to perform Administrator tasks while all the
others will be blocked.
After click the Add button, your PC's MAC Address will be placed in the list above.
Click the Save button to save your settings.
Note:
If your PC is blocked but you want to access the router again, use a pin to press and hold the
WPS/Reset button (hole) on the back panel for about 5 seconds to reset the router's factory
defaults on the router's Web-Based Utility.
5.11.4

Remote Management

Choose menu "Advanced→Security→Remote Management", and then you can configure the
Remote Management function in the screen as shown in Figure 5-61. This feature allows you to
manage your router from a remote location via the Internet.
Web Management Port - Web browser access normally uses the standard HTTP service
port 80. This router's default remote management web port number is 80. For greater security,
you can change the remote management web port to a custom port by entering that number
in the box provided. Choose a number between 1 and 65534 but do not use the number of
any common service port.
Remote Management IP Address - This is the current address you will use when accessing
your router from the Internet. This function is disabled when the IP address is set to the
default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to
255.255.255.255, then all the hosts can access the router from internet.
Note:
1.
To access the router, you should type your router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your router's WAN address is 202.96.12.8, and the port number used
is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for
the router's password. After successfully entering the username and password, you will be
able to access the router's web-based utility.
2.
Be sure to change the router's default password to a very secure password.
Archer C8
AC1750 Wireless Dual Band Gigabit Router
Figure 5-61 Remote Management
- 78 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac1750Archer c9

Table of Contents