Local Management - TP-Link Archer C8 User Manual

Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD

Attack Filtering.
TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value

between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the router will startup the blocking function immediately.
Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN

Port. The default setting is disabled. If enabled, the ping packet from the Internet cannot
access the router.
Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From LAN Port.

The default setting is disabled. If enabled, the ping packet from LAN cannot access the router.
This function can be used to defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by blocking.
5.11.3

Local Management

Choose menu "Advanced→Security→Local Management", and then you can configure the
management rule in the screen as shown in Figure 5-60. The management feature allows you to
deny computers in LAN from accessing the router.
By default, the radio button "All the PCs on the LAN are allowed to access the router's
Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to access
the Setup page of the router's Web-Based Utility locally from inside the network, check the radio
button "Only the PCs listed can browse the built-in web pages to perform Administrator
tasks", and then enter each MAC Address in a separate field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed can
Archer C8 AC1750 Wireless Dual Band Gigabit Router
Figure 5-60 Local Management
- 77 -