Wireless Security - TP-Link Archer C8 User Manual

Step 2: Enter the PIN number from the client device in the field on the WPS screen above. Then
click Connect button.
Step 3: "Connect successfully" will appear on the screen of Figure 5-16, which means the
client device has successfully connected to the router.

Note:
1) The WPS LED on the router will light green for five minutes if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the wireless function of the router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
5.4.3

Wireless Security

Choose menu "Advanced→Wireless 2.4GHz→Wireless Security", you can configure the
security settings of your wireless network. There are five wireless security modes supported by
the router: WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, and WEP.
Archer C8 AC1750 Wireless Dual Band Gigabit Router
Figure 5-16 Add A New Device
- 40 -