TP-Link Archer C8 User Manual page 21

4. Then WAN Connection Type page will appear as shown below. Select your connection type
if you know what it is or click Auto Detect button; then follow the instructions to continue.

Note:
1) It's likely that you will skip Step 3 and jump to Step 4 in some situations, which is normal.
2) Make sure the cable is securely plugged into the Internet port before using Auto-Detect.
3) Auto-Detect supports only three popular connection types, PPPoE, Dynamic IP, and
Static IP. If your connection type is L2TP or PPTP, you need to manually select the very
type and click Next to go on configuring.
Dynamic IP
Choose to clone MAC address or not and then click Next to continue.
Archer C8 AC1750 Wireless Dual Band Gigabit Router
Figure 3-4 WAN Connection Type
Figure 3-5 WAN Connection Type
- 10 -