Troubleshooting - Chicago Electric 65298 Set Up And Operating Instructions Manual

problem
Tool will not start. 1.
2.
Irregular cut line. 1.
2.
Undesirable cutting 1.
action.
2.
3.
4.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
pleaSe Read the Following caReFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS
LIST AND ASSEMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAkES ANy
REPRESENTATION OR WARRANTy OF ANy kIND TO THE BUyER THAT HE OR
SHE IS qUALIFIED TO MAkE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAkEN By CERTIFIED AND
LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL
RISk AND LIABILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE ORIgINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 65298

troubleshooting

possible causes
No power at outlet.
Power Cord not connected.
Bent, cracked, broken, or
loose Saw Blade.
Improperly exerting side-to-
side pressure on Saw Blade.
Dull Saw Blade.
Improper Saw Blade used.
Tool speed too slow.
Attempting to cut curves with
tool.
For technical questions, please call 1-800-444-3353.
possible Solutions
1. Check power at outlet.
2. Check that Power Cord is plugged in.
1. Replace Saw Blade. Make sure Blade is
securely installed in tool.
2. Hold blade at a 90° angle from workpiece.
1. Replace Saw Blade.
2. Use metal Saw Blades for cutting metal and
wood Saw Blades for cutting wood.
3. Increase tool Speed by squeezing Trigger
harder.
4. Use tool only to cut straight lines.
Page 13