Advertisement
Installation
1
Installation is the opposite of removal.
When installing control arms and
steering arm , please note:
A) Slide steering arm into place, and
tighten the pinch bolt
B) If pinch bolt doesn't go through,
move arm vertically while gently
pushing on bolt.
C) Apply blue LOCTITE on threads for
steering arm bolt, then tighten.
Rear Removal and Installation
Perform installation of rear ARB at the same time
*When performing complete Sig.Series package, removing OEM exhaust prior to ARB
highly recommended*
Torque Values
ARB Mounting Bracket Bolts, 10mm Triple Square
Lower Drop Link Bolts
Upper Drop Link Bolts
Chassis Cross Brace Bolts
Exhaust Muffler Hanger Nuts
9 of 28
29 N m
54 N m
54 N m
54 N m
20 N m
Advertisement
