Advertisement
8
Reinstall hardware for adjustable bracket
and tighten flanges and bracket with
mufflers aligned and spaced evenly.
Confirm the side-side distances are equal
(x).
Loosen nut (arrow) on adjustable bracket
and align muffler as necessary. Torque nut
to 23 Nm (17 ftlb
Once the correct alignment has been
achieved, torque down all band clamps
Test drive and check for rattles. Re-adjust
as necessary to provide proper clearance
NOTE: Ensure at least 1 ½" clearance
between exhaust pipes and heat shielding
26 of 28
Advertisement
