Advertisement
7
A) Remove top bolt for steering arm
B) Remove pinch bolt nut
NOTE: Do not allow bolt to back out or
turn. Remove nut, then remove bolt.
Pull down gently on steering arm thus
removing from upright
8
Remove the Upper Front Control Arm
nut and bolt.
Carefully pull up on control arms, thus
removing from upright
NOTE: The slits in the upright must not
be widened using a chisel or similar
tool! This can cause the pinch arms to
crack. If the control arm pins are stuck
in the housing, tap lightly with a rubber
mallet on the bottom of the control
arms.
9
Peel back on rubber seal and remove
Now remove plastic cover to reveal
control arm girdle bolts
10
Remove bolts caps.
NOTE: These are easily removed with
long nose pliers
6 of 28
Advertisement
