Front Removal and Installation
1
Before removing any parts, park the car on a secure, stable, and level surface.
Remove wheel trim; pull trim cap off light-alloy wheels (using puller in vehicle tool kit)
and loosen (but do not remove) the wheel lug nuts. Jack the vehicle up, and place the
car on four stable jack stands or use a professional vehicle lift. We recommend having
two people available for certain steps of the installation.
2
Remove wheels
3
Disconnect link on ride height sensor to
prevent damage.
NOTE: Driver's side only
4
Remove top nut and bolt for anti-roll bar
mount
6
Remove clevis bolt for lower shock
mount
5 of 28