Selecting A Line For The New Speed Dial Code; Choosing The Speed Dial Display Format; Programming A Name For The Speed Dial Code - Nortel M7310 Quick Programming Manual

S p e e d D i a l

SELECTING A LINE FOR THE NEW SPEED DIAL CODE

ACTION
1. After programming the new exchange, as explained in the
previous section:
2. Press '.
3. Press repeatedly to scroll through the options (Use
CHANGE
prime line, Use line: ___, Pool code _, and Use routing table). In
this example, choose the prime line. Stop scrolling when this
comes back up on the display:
Only extensions where this line appears have access to this Speed Dial code.

CHOOSING THE SPEED DIAL DISPLAY FORMAT

ACTION
1. After choosing the line with the previous procedure, you can
choose to see either the extension number being dialled or a name
that you have chosen. The display shows:
2. Press '.
3. Press to change between Y (see the extension number)
CHANGE
and N (to choose a name for the Speed Dial code).

PROGRAMMING A NAME FOR THE SPEED DIAL CODE

ACTION
1. Press '. This default name is displayed:
2. Press .
CHANGE
3. Press the number on the keypad that represents the first letter of the
name. Press the key repeatedly until the letter appears.
Example: for the name "Sutton," press the keypad number 7
three times to display the letter "S".
Press ---> to move to the next letter in the name.
Press # to enter a space.
4. Use the keypad and --> until the entire name is entered.
The name can be up to 16 characters long.
5. Press ' to continue programming.
24
VISUAL DISPLAY
001:01912567843
CLR CHANGE
Use prime line
CHANGE
Use Lines ____
CHANGE
VISUAL DISPLAY
Use prime line
CHANGE
Display digits:Y
CHANGE
Display digits:N
CHANGE
VISUAL DISPLAY
Name:Sys Spd Di..
CHANGE
Name:__
--->
Name:S__
<--- BKSP --->
Name:Sutton
<--- BKSP --->
Name:Sutton
CLR CHANGE