Carrier 42C Series Product Data page 92

Base unit dimensions (cont)
NOM DIMENSIONS (in. ±
UNIT
AIRFLOW
SIZE
A
(Cfm)
06 600 31
08 800 36
10 1000 40
12 1200 45
14 1400 50
16 1600 55
18 1800 60
20 2000 64
*Unit weights are based on dry coils and minimum rows. Weights exclude pack-
aging, valves, and other components.
NOTES:
1. Right hand unit shown; left hand unit opposite.
2. Coil stub-out location data available on request.
3. Unit fabricated of galvanized steel.
4. Internal parts fabricated of galvanized steel.
5. Sizes 06, 08 and 10 have one motor, one blower. Sizes 12 through 20 have
2 motors, 2 blowers.
6. Units must have drain line pitched and trapped externally.
7. See 42DA-203-1 for optional coil connections.
8. Fan switch, wall plate not shown.
9. Galvanized finished provided as standard.
10. Dimensions are in inches (mm).
92
42DE CEILING UNIT WITH FULL CASING AND ELECTRIC HEAT
1 / ) QTY/UNIT
8
B C D Blower
15 15 26 1
20 20 31 1
24 24 35 1
29 29 40 2
34 34 45 2
39 39 50 2
44 44 55 2
48 48 59 2
UNIT
1 — Motor Junction Box
WEIGHT*
Motor
(lb) 2 — Unit Mounting Channel (2), 14-gage; 4 Mounting
Slots,
1 150
3 — Auxiliary Drip Lip (optional, shipped loose)
1 160
4 — Side Access Panels
1 170
5 — Electrical Strip Heater Element (optional)
2 195 6 — Supply Air Duct Connection, 1 in.
7 — Manual Air Vent
2 205
8 — Filter, Throwaway, 1-in.
2 215
9 — Return Air Duct Connection, 2
2 230
10 — Drain,
2 235 11 — Bottom Access Panel
12 — Drain Pan
13 — Coil Inlet (see table on page 94), Copper Sweat Con-
nection
14 — Coil Outlet (see table on page 94), Copper Sweat
Connection
LEGEND
1 / -in. x 2-in.
2
1
/ in.
2
7
/ -in. OD
8
A42-4123