Registration Form - Ardisam GARDEN STAR 5020D Operator's Manual

ARDISAM
UNPACKING AND ASSEMBLY
❒ ❒ ❒ ❒ ❒ Registration Form
For Model 3515D Only
1. Remove handlebars and other loose parts.
Packing list:
❑ parts packet with owner's manual
❑ drag stake
❑ handlebars
❑ tiller
2. Cut carton open at engine end and lay end
panel flat.
Wheels are shipped in the tilling position, that is, with wheel
lockpins inserted through both the wheel hub and the axle. To roll
tiller from carton:
3. Release wheels by removing wheel lockpins.
4. Slide wheels toward transmission.
5. Replace wheel lockpins in axle holes only, and lock pins. Wheels
are now free to rotate.
Free Wheel Drive Position
(wheel lockpin in axle hole only)
6. Roll rototiller out of carton.
Complete and return.
Your rototiller has a serial number on the engine mount in front of
the left wheel. Record this number and the model number in the
space provided on page 2 of this manual. You will need these
numbers if you order parts.
Fill out and mail the registration card in your parts packet.
Warranty is valid only if your completed registration card is received
by Ardisam, Inc., within two weeks of the purchase date.
8