ARDISAM
UNPACKING AND ASSEMBLY
❒ ❒ ❒ ❒ ❒ Attach Handlebar to Tiller
3. Remove black plastic T-handle from parts packet and place on
throttle lever. Strike T-handle with rubber mallet or place wood
block on top and strike gently with hammer until the T-handle is
firmly seated on the throttle lever.
1.Loosen handlebar height adjustment bracket by loosening both
bolts with a 1/2" wrench.
lock washer
flat washer
3/8" bolts
lock nuts
handlebar
mounting tabs
2.Unscrew T-clamp and both washers from handlebar assembly.
10
t-clamp
handlebar
lower crossbar
height adjustment
bracket
height
adjustment
bracket bolts
transmission
cover