Controls And Adjustments; Wheel Lockout Butterflies - Ardisam GARDEN STAR 5020D Operator's Manual

CONTROLS AND ADJUSTMENTS

Section Checklist
Throttle Control
Belt Guard
CAUTION
PLEASE!
Before operating your tiller, learn the location
and function of all controls by reading this
section and the safety section.
❒ ❒ ❒ ❒ ❒ Wheel Lockout Butterflies
CAUTION
Never start engine or operate tiller with wheels
in free wheel position. The free-wheel position
is for transporting the tiller long distances over
level ground--do not attempt to move the tiller
up or down steep grades in the free-wheel
position.
❑ Wheel Lockout Butterflies--place wheels in free wheel
or tilling position
Shift Lever Rod
❑ Shift Lever Rod--select forward, neutral, and reverse and
engage tines and wheels
❑ Forward Belt--adjust tilling speed
❑ Drag Stake--adjust tilling depth
T-clamp
❑ T-clamp--adjust handlebar height
❑ Throttle Control--start and stop engine and adjust engine
Drag Stake
speed
Wheel Lockout
Butterfly
Place wheels in free wheel or tilling position.
To change wheel from free wheel to tilling position:
1. Pull knob away from machine until wheel lockout
2. Rotate knob 90
3. Release knob.
4. Repeat for other wheel.
NOTE: Always have
both wheel lockout
butterflies in or out. Do
not operate tiller with
only one wheel
locked.
15
butterfly rotates.
o
so wheel lockout butterfly aligns with
neutral slot.
ARDISAM
Wheel lockout butterfly
in tilling position.