Advertisement
Using the Remote Control
Establishing a Remote Connection
To establish a connection with the remotely located Omnia-3, return to the Options Menu and select Connect,
which brings up a list of connections you have defined. Double-click on the name of the desired connection, or
highlight it to select it and press OK. The con
the bargraph meters become active when a connection has been established.
Omnia-3 Remote Control after connection is made. Note that the currently selected Preset and
the Omnia's actual System time are being displayed.
U
se Cancel to leave the dialog box without making any connection.
You can choose to have the program automatically establish a connection by going to the Options Menu,
selecting Auto-Connect to Last. Then the program will always connect to the Omnia-3 using the last-used
startup connection entry.
Note that if you have not entered a Password while editing the connection type, you will be prompted for it each
time you connect to the Omnia!
Terminating a Connection
From the Options Menu, select Disconnect. Closing the program will also terminate any connections.
Remote Features
The Remote Control Program for Omnia-3 provides all the features of the front panel, displayed in an easy-to-
use format. It adds these enhancements:
•
Multiple control windows may be open at the same time.
•
The scroll wheel on mice so equipped is supported for fast, easy adjustment of parameters.
•
The ability to save, load, and print presets and system parameters to the computer. (in the File Menu)
This is very handy for reference and backup purposes.
•
The ability to edit and load Trigger Scripts as described starting on Page 66.
nection will be established after a short pause, and you should see
64
Advertisement
