Advertisement
Tilt EQ (Omnia-3am only)
See Omnia-3am System Adjustments in Chapter 5 for full details.
Tilt Frequency (Omnia-3am only)
See Omnia-3am System Adjustments in Chapter 5 for full details.
LPF Frequency (Omnia-3am only)
See Omnia-3am System Adjustments in Chapter 5 for full details.
HP Filter (Omnia-3am only)
See Omnia-3am System Adjustments in Chapter 5 for full details.
LPF Frequency (Omnia-3net/drm only)
See Omnia-3net/drm System Adjustments in Chapter 6 for full details.
Stereo Generator (Omnia-3fm Turbo only)
Six parameters are set under this sub-menu: SCA Level, Composite 1, Composite 2, Pilot Level, Phase Adjust,
and Separation.
See Omnia-3fm Turbo System Adjustments in chapter 4 for full details.
Display
Two parameters are set under this sub-menu: Contrast and Backlight.
Contrast adjusts the brightness difference between the lightest and darkest segments in the front panel display.
Note that if this setting is mis-adjusted the display will "disappear."
Backlight adjusts the LCD's backlight to compensate for room brightness.
Utility
There are nine parameters or sub-menus reached through this menu item: About, Preset, System Attributes,
Card Maintenance, Daypart Table, Security, Set Time, Set Date and Control Port Baud.
About
The first thing displayed when you click on About is the Omnia factory telephone number in Cleveland! To
display the currently running software versions, click OK. The Style and Release version will be displayed.
Click OK again and the Bios, display and Loadset versions are displayed. Clicking OK again brings up the
copyright screen and one more click returns you to the Utility menu.
Preset
This sub-menu has two parameters: Delete and Rename. Select Delete to permanently delete a User Preset
from the PC Card. A selection box will be displayed allowing you to choose a preset for deletion. Once a
choice is made, a confirmation box is displayed. The preset will not be deleted until "OK" is selected from the
confirmation box. Select Rename to change the name of an existing User Preset. A selection box will be
displayed allowing you to choose a preset to be renamed. Once a choice is made, a naming box is displayed to
enter the new name for the preset. This works as described above in "Audio Processing": "Save to Card as".
System Attributes
There are three parameters under this sub-menu item: Load Defaults, Load From Card and Save to Card.
Load Defaults: Reloads all of the factory default system parameters into the system. System parameters are
anything that is not saved with the processing preset, such as input and output levels, and RS-232 baud rate.
27
Advertisement
