Table of Contents
Advertisement
E L A N H O M E S Y S T E M S
© ELAN Home Systems 2010 | All rights reserved.
Chapter 1: Introduction
TS2 Film Interactive Touchpad (FIT) is a double-gang, in-wall system controller that uses a
touch film in lieu of hard buttons to perform all functions normally associated with a
keypad. Source and system control icons and function names are printed on
interchangeable backlit film transparencies. Each icon or function name corresponds to an
active "hot spot" that issues a control command and gives both audible and visual
confirmation to the user when pressed.
The TS2 is for use with ELAN Home Controllers running Core Module Software 5.0 or later
and is not interchangeable with the Olé2XL.
The touchpad features a 2" color OLED to provide source, sub-system and programming
feedback to the user.
Programming for the TS2 resides in the Home Controller and is accomplished with ELAN's
Configuration Software.
Film Interactive Technology
The TS2 utilizes a polyester plastic film suspended over a glass panel, which is placed over
a changeable backlit film. Depressing the polyester film with a finger allows the film to
touch the glass panel underneath, generating a location signal that is read by the
electronics.
TS2
INSTALLATION MANUAL
Items in Package:
• TS2 Touchpad
• White Trim Plate
• Black Film Overlay
• White Film Overlay
• Quick Install Guide
• User's Guide
• Mounting Screws (4)
Page 4
Hide quick links:
Advertisement
Table of Contents
