Planet WDRT-731U User Manual page 126

5) The following TCP/IP Properties window will display and the IP Address tab is open on this window
by default.
Now you have two ways to configure the TCP/IP protocol below:

Setting IP address automatically
Select Obtain an IP address automatically, Choose Obtain DNS server address automatically, as shown in
the Figure below:

Setting IP address manually
1
Select Use the following IP address radio button.
2
If the Router's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
3 Type the Router's LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4 Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can
Figure B-4
-120-
User Manual of WDRT-731U