Goodman PACKAGE TERMINAL AIR CONDITIONER/HEAT PUMP Installation Instructions & Owner's Manual page 27

ENTERPRISE - MUlTIPLE WIRELESS (ONTROLLERS
CENTRAL MONITORING AND
CONTROL OF MULTIPLE PROPERTIES
> Data Warehousing
> Savings Analysis
> Email Reporting
> Virtual Metering
> Load Shedding
WEB-BASED, REAL-TIME MONITORIN(j
AMANAc BRAND DllilSMARTm (ONTROlLER:
All of the PTACs in the building can be managed through a single interface on a Pc.
FEATURES INCLUDE: Full unit details for every PTA(, visible from the front desk or home office, automatic emails for PTAC
maintenance, ability to change all settings on the unit, and enhanced diagnostics. Monitor up to 170 PTACs, WIRELESSLY,
With one controller. Additional controllers can expand the network for additional rooms/properties.
>
System Verification
A. . .
lBft
_lMl'l_tmr
>
Global Setbacks
>
EMS Configuration
>
Site Statistics
> Battery Notices
>
Email Reporting
>
Unit Health
>
Unit Code Alerts
Temp Limiting - Each PTAC
can be configured with a heat­
ing and cooling temperature
set-point limit.
Setbacks - Once a room is declared unoccupied by the occupancy sensor, the PTAC progresses through three different
temperature setbacks, configured as three degree and time pairs (An example configuration is listed below).
1st: 2°, 30 mins - Setback the temp 2 degrees after 30 minutes
2nd: 4°, 1 hr - Setback the temp 2 more degrees after 30 more minutes
3rd: 8°, 3 hrs - Setback the temp 4 more degrees after 2 more hours
Unrented Set-Points By integrating with your property's Front Desk System, the PTACs will adjust to speCific set-points when
no longer identified as rented in the system.
CT-DPTAC
www.amana-ptac.com
5