HIKVISION DS-8000HMFI Series User Manual page 53

Move "Active Frame" to "PTZ Linkage" button, press[ENTER]key to enter into "PTZ
Linkage" setup menu:
First select one camera, then select one of following PTZ linkage:
Preset: Set the flag as " " to enable preset, in the preset number edit box and input
one preset number that has been setup already. Please refer to chapter 5.15 for
preset setup.
Sequence: Set the flag as " " to enable sequence and input one sequence number
that has been setup already. Please refer to chapter 5.15 for sequence setup.
Cruise: Set the flag as " " to enable cruise. Please refer to chapter 5.15 for cruise
setup.
Press "Confirm" button to save and return "Alarms" menu. Press "Cancel" button
or[ESC]key to abort and return "Alamrs" menu.
Note: Please make sure that the PTZ you are using can support preset, sequence and
cruise functions. One external alarm input can trigger many cameras PTZ linkage.
Step 9: Copy the parameters to other external alarm input You can copy the
parameters of current alarm input to other external input.
Step 10: Save setup In "Alarms" menu, press "Confirm" button to save the parameters.
Press "Cancel" button or[ESC]key to abort.
Alarm relay output setup
Step 1: In "Alarms" menu, use[↑][↓]keys to select one alarm output.
User Manual of DS-8000HMFI Mobile DVR
Page
Total
53 104