Standing Test; How To Perform The Standing Test; Psi Test; Tools Needed - Yamaha YZ250 2001 Repair Manual

Chapter IV

4.3 Standing Test

The standing test will decide if your motorcycle can stand or if there was
an error during reassembly.

How to Perform the Standing Test

 Step1: Prepare a large empty area where you will stand your motorcycle
at.
 Step2: Pull your motorcycle from its stand and allow it to hold its own
weight.
 Step3: Interpret your results:
o If the bike falls and the wheel becomes disconnected from the forks,
then an error occurred with the axle.
o If the bike stands, then you have properly put your 2001 YZ250
back together.

4.4 PSI Test

The PSI test will show whether your front tire is holding any air. This test
will prove if you were successful in repairing your 2001 YZ250.

Tools Needed

 PSI Guage
o
29