Troubleshooting; Care And Maintenance - Utilitech 006220B User Manual

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
1. There may be a poor connection between
The light
the light and supply wires inside the
will not
junction box.
illuminate.
2. No power to light.

CARE AND MAINTENANCE

This LED light provides years maintenance-free service with no bulbs to change.
Do not touch LED or open fixture housing.
To clean, turn OFF all power to circuit and clean surfaces with a mild, non-abrasive cleaner.
CAUTION: Turn OFF all power to circuit at main circuit breaker or fuse box. DO NOT rely on
wall switch alone to turn off power.
WARRANTY
FIVE-YEAR LIMITED WARRANTY.
If this product fails due to a defect in materials or workmanship within five (5) years from the date of
purchase, return it along with proof of date of purchase and it will be replaced with the same or
comparable model free of charge.
This warranty is void if damage or defect has resulted from accident, abuse, misuse or faulty repair.
This warranty gives you specific legal rights and you may have other rights that vary from state to
state.
IN NO EVENT WILL LIABILITY EXTEND TO ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL
ORINDIRECT DAMAGES OF ANY KIND ARISING OUT OF THE USE OR MISUSE OF THIS
PRODUCT.SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL ORCONSEQUENTIAL DAMAGES SO THE ABOVE EXCLUSION OR LIMITATION
MAY NOT APPLY TO YOU.
CORRECTIVE ACTION
1. Check supply wire
2. Check that the switch is on
6
connections.
and there is power to light
fixture.