Care And Maintenance; Troubleshooting - Utilitech SE1048-BP2-02LF0-U Operating Instructions Manual

SECURITY LIGHT OPERATION
MODE
Test mode.
AUTO motion sensor
mode.
Manual "ON" mode.
Return to AUTO Motion
sensor mode.

CARE AND MAINTENANCE

• IMPORTANT
traditional light bulbs and will last for 30 years or more (based on 3 hours of usage per day).
•

TROUBLESHOOTING

• Extreme hot or cold weather could affect the performance of the built-in sensors that detect body heat.
Certain winter clothing can shield a person's body heat from the sensor during extreme cold weather.
During extreme hot weather, the sensor may not be able to distinguish the difference between normal body
temperatures and the surrounding high temperatures. The sensor will begin working normally once weather
conditions return to normal.
PROBLEM
Light does not come on
at night when motion
is detected.
SLIDE SWITCH
Test area.
Timer area.
Timer area.
Timer area.
POSSIBLE CAUSE
1. No power is being
2. Another light source is
causing the security light
to think it is daylight.
came loose.
WALL SWITCH
On.
On.
Toggle OFF and ON
within two seconds.
On.
CORRECTIVE ACTION
1. Check that circuit breaker and/or wall
switch power is on.
2. Turn off surrounding lights and/or re-aim
the sensor head.
reconnect any loose wiring.
8
SENSITIVITY A
Any setting.
Any setting.
Any setting.
Any setting.
A
Lowes.com