Reset Procedures - Johannus Studio 150 User Manual

3. Press the ENTER piston. A question to
select a MIDI stop to configure appears on
the display.
4. Activate the MIDI stop which has to be configured (MIDI from the Swell, for
example). The display shows on the first
line: Swell Channel (the selected MIDI
stop and the first part of the MIDI code)
and on the second line the settings of all four parts: Channel, Msb, Lsb en
Voice.
5. Use the - and + pistons to select the desired MIDI-channel.
6. Press the ENTER piston. The display shows:
Swell Msb.
7. If needed, use the - and + pistons to select
the desired Msb setting.
8. Press the ENTER piston. The display shows:
Swell Lsb.
9. If needed, use the - and + pistons to select the desired Lsb setting.
10. Press the ENTER piston. The display shows:
Swell Voice.
11. Use the - and + pistons to select the desired Voice setting.
12. Press the ENTER piston. The selected configuration is now stored in memory.
The first of the four parts of the
programmable MIDI code appears on the
display.
13. Press the MENU piston to return to the
main menu.
14. Press the MENU piston to exit the
Johannus Menu.

4.11.8 Reset Procedures

The Reset Procedures function is used to reset a number of settings to the factory
settings.
1. Press the MENU piston.
2. Use the - and + pistons to select the Reset
Procedures function on the display.
3. Press the ENTER piston. The first option of
the Reset Procedures appears on the
display.
4. Use the - and + pistons to select the desired reset procedure:
- Memory default: Clears the entire capture memory.
- MIDI default: Resets the factory settings of the MIDI stops.
- Preset default: Resets the factory settings of the pre-programmed
memory locations.
- Reverb default: Resets the factory settings of the reverb.
User Manual Studio 150
Select a MIDI
Stop to config
Swell Channel
2 0 0
Swell Msb
2 0 0
Swell Lsb
2 0 0
Swell Voice
2 0 0
Swell Channel
2 0 0
Johannus Menu:
MIDI Config
Studio Mem: 1
Tr: 0/440 Exp:Sw
Johannus Menu:

Reset Procedures

Reset Procedures
Memory default
1
1
1
1
1
20