Reset Procedures - Johannus Ecclesia User Manual

1. Press the MENU piston.
Use the - and + pistons to select the Orchestrals function on the
2.
display.
3. Press the SET piston. The solo- and orchestral voices appear on the display.
4. Use the - and + pistons to select the solo- or orchestral voice from which the
settings has to be changed.
5. Press the SET piston. The actual settings of the solo- or orchestral voice
appear on the display.
6. Use the - and + pistons to select the desired voice.
7. Press a key on the manual or pedal on which the solo- or orchestral voice has
to be assigned. The new assignment appears on the display.
8. Press the MENU piston 3x to exit the Johannus Menu.
5.9

Reset Procedures

The Reset Procedures function can be used to reset a number of settings to the factory
settings.
1. Press the MENU piston.
Use the - and + pistons to select the Reset Procedures function on
2.
the display.
3. Press the SET piston. The available Reset Procedures appear on the display.
4. Use the - and + pistons to select the desired reset procedure:
- Crescendo def.:
- Cust. Temperament def.: Resets the custom programmable
- Expression Pedals def.: Resets the factory settings of the
- Memory default:
- MIDI default:
- Preset default:
- Reverb default:
- Zimbelstern default:
The following reset procedures are only available if the organ is equipped
with the optional Solo or Ultimate Voice Package:
- Orchestrals default:
- Special Stop mode def.: Resets the factory settings of some special settings
5. Press the SET piston. A question to confirm appears on the display.
Use the - and + pistons to select No or Yes. Press the SET piston to confirm
6.
and to return to the Reset Procedures menu.
7. Press the MENU piston 2x to exit the Johannus Menu.
User Manual Ecclesia T-270 / T-370 / D-470 / D-570
Resets the factory settings of the 20
steps of the crescendo pedal.
temperament to equal temperament.
expression pedals.
Clears the entire capture memory.
Resets the factory settings of the MIDI
stops.
Resets the factory settings of the pre-
programmed memory locations.
Resets the factory settings of the reverb.
Resets the factory settings of the
Zimbelstern
(Ecclesia D-470/D-570 only)
Resets the factory setting of the solo- and orchestral
voices.
for some orchestral voices.
.
27