TEC MA-1650-4 Series Programming Manual page 87

Address No.
6 Tax Status
NOTES 1. The rate of each Tax will be later be set and described near the end of
7 High Amount Limit
NOTES 1. To cancel the preset limit (i.e. to allow any amount), enter 0.
8 Low Amount Limit
NOTES 1. To cancel the preset limit (i.e. to allow any amount), enter 0.
Description of Programming Contents
-- Continued --
• Enter a one- to four-digit Status Code for applicable Taxes. Or enter 0 if the
department handles non-taxable items.
0: Non-taxable
1: Tax 1 (Tax 1 taxable) combining Tax1 to Tax4 taxable status.
2: Tax 2 (Tax 2 taxable) For example, enter 12 to select Tax1
3: Tax 3 (Tax 3 taxable) and Tax2 taxable status.)
4: Tax 4 (Tax 4 taxable)
this chapter.
2. In case of inclusive tax, the combination of the tax status is unavailable.
Only one inclusive tax status can be programmed for a department. (Tax
3 taxable or Tax 4 taxable) (Applicable for V1.9 or after)
Enter a maximum of 7 digits to be set as the high amount to be locked out.
Example) To prohibit any amount equal to or larger than $40.00:
(Allows any amount equal to or smaller than $39.99.)
2. The limit amount set here will be apllied to entries in REG mode only, but
not in MGR or - mode.
3. Zeros must be entered as all the digits other than the highest digit. If any
other value is entered, it will be regarded as a zero.
ex.) Entering 4001 to 4999 will all result in setting 4000.
Enter a maximum of 7 digits to be set as the low amount limit.
example) To allow any amount equal to or larger than $4.00:
(Allows any amount equal to or larger than $4.00.)
2. The limit amount set here will be applied to entries in REG mode only, but
not in MGR or - mode.
3. Zeros must be entered as all the digits other than the highest digit. If any
other value is entered, it will be regarded as a zero.
ex.) Entering 401 to 499 will all result in setting 400.
-- Continued on next page --
[#]
(More than one code can be entered for
4000 [#]
400 [#]
- 84 -
EO3-11070
MA-1650-4 SERIES