Master-Satellite System Programming; Credit - TEC MA-1650-4 Series Programming Manual

5. MASTER-SATELLITE SYSTEM PROGRAMMING

This chapter describes on settings required for the Master-Satellite System and on remarks and notes for the settings.
As for the settings for the Stand-alone level, refer to the Programming Manual for Stand-alone Level.
Most of the settings here are to be performed on the Master Terminal, and those programmed data will be loaded
to each Satellite Terminal by DLL operations described in Chapter 6.
The following are the programming submodes that need changes from the Stand-alone level:
SFKC PROGRAMMING (BLIND Mode)
Be certain to set the [RTR] key (SFKC 138) on the Master Terminal. This key is to be used in settings, DLLs,
and other in-line service jobs that will be described in this manual.
CASHIER CODE AND NAME PROGRAMMING (Submode 2)
Select the "Floating Cashier Feature" or the "Non-floating Cashier Feature" in the RAM Allocation Setting.
PLU TABLE PROGRAMMING (Submode 4)
Select "PLU to be inquired" or "PLU not to be inqured" in the RAM Allocation Setting. (The status "PLU to be
inquired" (inquired to the Center File) is obtained when Expansion Memory is used.)
SYSTEM OPTION PROGRAMMING (Submode 18)
By performing a RAM Clear after connecting the M/S IFU Board to the CPU Board, setting of System Option
Address 46 (IN-LINE OPTION) will be effective. (Refer to the Programming Manual for the stand-alone level.)
CUSTOMER FILE CODE (Submode 15)
The Customer Files (Check Tracks) are always programmed in the Center File (that is subject to inquiries) in
the Master-Satellite System.
CREDIT CARD No. NEGATIVE CHECK FILE PROGRAMMING (Submode 54)
The Negative Card Files are always programmed in the Center file (that is subject to inquiries) in the Master-
Satellite System (only when Expansion Memory is used).
PLU ADDITION TO PLU ADDITIONAL TABLE (Submode 64)
It is operable when the feature "PLU to be inquired" is selected in the RAM Allocation Setting, it can be operated
only on the Master Terminal.
PLUs added in the Additional PLU Table (Submode 64 and Urgent Maintenance) is to be merged into the PLU
Main Table by the PLU Merge operation.
OPERATION
Furthermore, there are some other programming operations that need to be set for the Master-Satellite System
only, such as DISPLAY MESSAGE, ERROR MESSAGE, etc. Therefore, also refer to the Programming Manual
for Stand-alone Level.
Mode Lock: X or Z (The IN-LINE Lamp must be illuminated)
40 [AT/TL]
- 7 -
EO3-11070
MA-1650-4 SERIES