TEC MA-1650-4 Series Programming Manual page 128

SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)
By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the name of
each salespersons can be programmed in maximum 12 characters.
Programming
CONDITION
OPERATION
20 [X]
Repeat for other salespersons.
NOTES: 1. A maximum of 12 regular-sized or 6 double-sized characters may be programmed for a name.
A combination of both types is also available.
2. Even if no name is programmed (i.e. skipping the Character Entries before the second [ST] key)
for a Salesperson Code, that code can be used in sale entries. Then, auto-preset ID symbol "S
P xx" (xx = Salesperson Code) will be printed instead of a name in this case, for his/her ID in receipt
print, etc.
ex.) To program the following salesperson code and names:
CODE
1
2
3
Any time outside a sale
Mode Lock : SET
|Salesperson Code| [ST]
1 to 99
NAME
Mode Lock to SET.
20 [X].
White 1 [ST] (Salesperson code 1)
507 [#] (W)
608 [#] (h)
609 [#] (i)
704 [#] (t)
605 [#] (e) [ST]
Stacy 2 [ST] (Salesperson code 2)
503 [#] (S)
704 [#] (t)
601 [#] (a)
603 [#] (c)
709 [#] (y) [ST]
Jansen 3 [ST] (Salesperson code 3)
410 [#] (J)
601 [#] (a)
614 [#] (n)
703 [#] (s)
605 [#] (e)
614 [#] (n) [ST]
[AT/TL]
Character Entries
* See NOTE 1 below.
* For sequentially programming codes, the
code number specification can be skipped.
- 125 -
MA-1650-4 SERIES
[ST] [AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P20
01 White
02 Stacy
03 Jansen
0047
EO3-11070