TEC MA-1650-4 Series Programming Manual page 120

MINOR GROUP NAME PROGRAMMING (Submode 13)
In this operation, the name of each Minor Group is programmed. Which Departments and Minor Groups are linked
to each Major Group has already been set in the DEPARTMENT PROGRAMMING operation, Submode 3.
CONDITION
OPERATION
13 [X]
NOTE: A maximum of 12 regular-sized characters may be set for each Minor Group name. One double-sized
character occupies two regular-sized characters' space. Also see the CHARACTER ENTRIES at the
beginning of this chapter. If no name is programmed for a Minor Group, an auto-preset data is assigned
as the Minor Group Name (GPxx; xx = Minor Group Code 01 to 30).
ex.) To program the following names to the respective Minor Groups:
Minor Group 1
Minor Group 2
Minor Group 8
Key Operation Mode Lock: SET, enter 13, depress [X].
1 [ST] (Minor Group Code)
[X] 506 [#] 405 [#] [#] 206 [#] [#] [X] 406 [#] 502 [#] [ST]
(Name: VE & FR)
2 [ST] (Minor Group Code)
[X] 413 [#] 405 [#] [#] 206 [#] [#] [X] 406 [#] 409 [#] [ST]
(Name: ME & FI)
8 [ST] (Minor Group Code)
[X] 415 [#] 504 [#] 408 [#] 405 [#] 502 [#] 503 [#] [ST]
(Name: OTHERS)
[AT/TL] (to complete this submode)
Any time outside a sale
Mode Lock: SET
|Minor Group Code| [ST]
(1 to 30)
Repeat for other groups (max. 30 groups)
V E &
M E &
O
T H E R S
Character Entries
(See NOTE 1)
*
R
F
I
F
- 117 -
MA-1650-4 SERIES
[ST] [AT/TL]
* (For sequentially programming
Group Codes and Names, the
code specification can be
skipped.)
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P13
01VE & FR
02ME & FI
08OTHERS
0042
EO3-11070