TEC MA-1650-4 Series Programming Manual page 169

PC TRANSMISSION INFORMATION SETTING (Submode 68)
This submode is effective for a system with a PC connection, and provides settings of various requirements for
transmission with the PC.
CONDITION
OPERATION
68 [X]
NOTES: 1. The Standard Values are auto-set by a RAM Clear.
2. When the Baud Rate is changed in the above operation, the new Baud Rate will be effective by
turning the terminal's power OFF and then ON.
ex.) To set the Inquiry Supervising Timer to 10 seconds:
Mode Lock: SET, 68 [X]
2 [ST] 10 [#] [AT/TL]
Any time outside a sale
Mode Lock: SET
1 [ST] |POL Supervising Timer| [#]
Max. 2 digits; 0 to 99 (sec.)
(Standard: 20 sec.)
2 [ST] |Inquiry Supervising Timer| [#]
Max. 2 digits; 0 to 99 (sec.)
(Standard: 6 sec.)
3 [ST] |Sending Delay Timer| [#]
Max. 2 digits; 0 to 99 (1 = 20m sec.)
(Standard: 3 = 60m sec.)
4 [ST] |Baud Rate Code| [#]
1 to 4
1: 9600 BPS (Standard)
2: 4800 BPS
3: 2400 BPS
4: 1200 BPS
Repeat for other addresses.
- 166 -
EO3-11070
MA-1650-4 SERIES
[AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P68
#2
0080
10