Removing And Reinstalling The Tablet Pc Software - Intel Web Tablet Product Manual

Removing and Reinstalling the Tablet PC
Software
If the tablet software on the PC becomes damaged, you may
need to reinstall the tablet software. In some cases, you can
reinstall the software over the existing installation. In other
cases, you may need remove the software first, and then reinstall
a fresh copy.
Removing the tablet PC software will delete the home
Note:
page settings, favorites, and history for all five home buttons.
Remove the Tablet PC Software
1 At the PC, open the Windows*
Programs > Intel Web Tablet > Uninstall Tablet Software
The Remove Tablet Software dialog appears.
2 Select the software you want to remove:
• Make sure the
check box is selected.
• You can remove the tablet's audio player software or
leave it on your PC. To remove it, make sure the
Remove RealNetworks* RealPlayer*
selected.
3 Click
Remove
software from the PC.
• If you are prompted to remove any shared files, click
Yes .
• If you are notified that some files were not removed
because other programs may be using them, click
4 When the software removal completes, click
26
| INSTALLATION – SPECIAL CASES
menu and select
Start
Remove Intel ® Web Tablet software
check box is
. The PC will begin removing the tablet
After the PC finishes restarting, use the following steps to
reinstall the tablet software.
Reinstall the Tablet PC Software
1 At the PC,
CD-ROM drive
2 From the Windows desktop, open
double-click the CD-ROM drive.
3 Double-click
appears.
4 Click
the on-screen instructions to install the software.
.
The Setup Wizard shows several screens, and displays your
AnyPoint wireless home network code. This is the network
code that is currently set up on the tablet.
When you complete the Setup Wizard, you will be asked to
restart your PC.
5 Click
6 When the PC restarts, you may receive a Windows logon
prompt. If so, do not click
Windows logon.
7 When restart completes, you'll see a Congratulations screen
that displays the network code.
8 Click
.
OK
Restart.
insert the Intel Web Tablet Setup CD into the
.
My Computer
. The Intel Web Tablet Setup screen
setup.exe
to begin installing the tablet software. Follow
Install
Restart Now to complete the PC setup.
. Use your existing
Cancel
Finish .
and