Printing From The Tablet; Turning The Screen Saver On And Off; Using The Tablet As An Electronic Picture Frame - Intel Web Tablet Product Manual

Printing from the Tablet

You can print a web page from your tablet by pressing the print
button on your tablet. The tablet sends the page that is currently
on the tablet screen to the PC's default Windows printer. No
additional setup is required.

Turning the Screen Saver On and Off

If you turn the screen saver feature on and then turn the tablet
off while it is connected to AC power, the tablet displays a
screen saver image.
To turn the screen saver feature on or off, touch
button bar, then touch the

Using the Tablet as an Electronic Picture Frame

You can turn your tablet into an electronic picture frame when
the tablet is not in use but connected to AC power. Display the
tablet on your kitchen counter or in the family room with your
favorite photos on the screen. See a new picture every few
seconds.
Requirements
To be displayed, pictures must use JPEG or GIF format and be
200 KB or less in size (or contain less than 1 million pixels).
Larger files and other file types will not display.
12
| OPERATING YOUR TABLET
controls
on/off button.
screen saver
Making Your Pictures Available to the Tablet
To make your pictures available for display, copy them to your
tablet's PC in the
screensaverpictures
Tablet folder.
If you did not change the location when you installed the tablet
software, copy your files to the following folder:
C:\Program Files\Intel\Web Tablet\screensaverpictures
Displaying Your Pictures on the Tablet
Your pictures will replace the screen saver image normally
displayed when you have the tablet's screen saver feature turned
on the
on and the tablet is off but charging.
To make sure the tablet's screen saver is turned on, press your
home button, touch the
touch the
screen saver
Now, whenever the tablet is turned off and connected to AC
power to recharge its battery, your pictures will be shown on the
tablet.
Turning Off the Picture Frame Feature
Remove all pictures from the
the default screen saver image will be used instead of your
pictures.
subfolder of the Web
controls button on the button bar, then
button until it shows .
on
folder. Then
screensaverpictures