Intel Web Tablet Product Manual page 23

Create a Network Code (On the PC)
1 The Setup Wizard shows several screens and asks you to
create a network code. Use only numbers 0 through 7.
Write down the network code in the space provided below.
You will need this network code to set up the tablet.
Write your network code here:
For more information about creating a network code, click
on the Setup Wizard screen.
Help
2 Continue to follow the on-screen instructions.
• If the PC has more than one Internet connection, choose
the connection that you want to use with the tablet.
• If you are prompted for your Internet Service Provider
(ISP) password, enter and confirm the password that the
PC uses to connect to your ISP, and then click
Restart Your Computer
When you complete the Setup Wizard, you will be asked to
restart your PC.
1 Click to complete the PC setup.
Restart Now
2 When the PC restarts, you may receive a Windows logon
prompt.
• If so, do not click Cancel
• Use your existing Windows logon.
• Or, if this is your first time logging on, type a User
Name but no Password and click
.
OK
.
.
OK
3 When restart completes, you'll see a Congratulations screen
that displays the network code you created.
4 Click Finish .
Note: If you are an America Online (AOL*) customer
and you use AOL as your Internet Service Provider (ISP), you
must set your AOL preferences to store the passwords for your
AOL screen names. Do this before you continue with this
installation.
Return to the Tablet and Complete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2 Touch and follow the instructions on the tablet
Continue
screen.
3 When prompted for a network code, enter the network code
that you created on the PC and wrote down in the previous
section.
The tablet will reset when its setup process completes. This
could take some time.
INSTALLATION – SPECIAL CASES |
21