Installing Additional Tablets - Intel Web Tablet Product Manual

Installing Additional Tablets

Use the following steps if you already have an Intel
Tablet installed in your home and you are adding a new tablet.
Note: If you purchased an Intel Web Tablet that includes a
wireless adapter, do NOT install the new adapter on the PC. The
tablet will use your existing wireless adapter to communicate
with the PC.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet to activate the battery.
2 Plug the AC adapter into the wall. Open the tablet access
panel on the side of the tablet and plug the adapter into the
tablet's AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The
installation process takes approximately 15 minutes.
Get Your Network Code From the PC
1 At the PC, open the Windows* Control Panel, then double-
click the
Wireless Control Panel
Panel dialog displays the network code in use on the PC.
2 Write down the network code in the space provided below.
You will need this network code to set up the tablet.
Write your network code here:
3 Close the Wireless Control Panel dialog.
® Web
icon. The Wireless Control
Return to the Tablet and Complete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2 Touch and follow the instructions on the tablet
Continue
screen.
3 When prompted for a network code, use the AnyPoint
network code that you found on the PC and wrote down in
the previous section.
The tablet will reset when its setup process completes. After the
tablet resets, it is ready for use.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first
time.You can use the tablet while it is charging.
Access Your Home Page From the New Tablet
The home buttons on the new tablet will match the home buttons
on your existing tablet(s). Use the same home button on each
tablet to access your personal home page. For example, if your
home button is the green one, use the green button on any of
your tablets to access your home page.
Only one tablet can use a particular home button at any given
time. If you press a home button and someone is already using
that button on another tablet, you'll receive a message notifying
you that another tablet is using that button.
INSTALLATION – SPECIAL CASES |
25