Sea-doo 2005 4-Tec models Shop Manual page 238

1. Screws
2. Steering padding
Remove steering padding no. 23.
Handlebar
Remove steering cover and steering padding as
mentioned above.
Remove 4 elastic stop nuts M8 no. 24 retaining
steering clamp no. 25.
TYPICAL
1. Remove nuts
2. Steering clamp
Detach steering clamp no. 25 and remove handle-
bar no. 9.
On GTX Supercharged Limited models, with-
draw rubber pad no. 26 and stopper no. 27.
smr2005-022
TYPICAL
1. Rubber pad
2. Stopper
Cable Support
RXP Models
Remove front vent tube.
All Models
Loosen bolts no. 28 and remove retaining block
no. 29 from cable support no. 30.
1. Retaining block
Loosen bolts no. 31 each side of steering support
no. 32.
www.SeaDooManuals.net
Section 08 STEERING SYSTEM
Subsection 01 (STEERING SYSTEM)
231