OIL PRESSURE GAUGE CONTROL OUTLINE
• The engine coolant temperature signal and engine speed signal are output from the PCM to the microcomputer
in the instrument cluster.
End Of Sie
OIL PRESSURE GAUGE CONTROL CONSTRUCTION/OPERATION
System Wiring Diagram
Operation
• The engine coolant temperature signal and
engine speed signal sent from the PCM via the
CAN system is input to the microcomputer in the
instrument cluster. The microcomputer calculates
the oil pressure based on the engine coolant
temperature signal and engine speed signal, and
sends the output signal to the oil pressure gauge
according to the calculated value.
End Of Sie
HORN CONSTRUCTION
• A flat-type horn has been adopted.
End Of Sie
09–22–14
INSTRUMENTATION/DRIVER INFO.
IG1 B+
1G
1C
INSTRUMENT
CLUSTER
CAN CONTROL
CIRCUIT
1L
1J
PCM
E5U092255430N25
E5U092255430N26
OIL PRESSURE GAUGE
MICROCOMPUTER
1H
1E
OIL PRESSURE
SWITCH
E5U922ZS5013
E5U092266790N01
HORN
E5U922ZS5015