Changing The Bulb For The Interior Light - Bosch Maxx WTL 6500 Instruction Manual And Installation Instructions

Changing the bulb
for the interior light
You will need a special tool and a new bulb. The
se are both available from specialist suppliers.
- Torx screwdriver, size T20.
- 15 watt bulb for E14 oven.
d
Danger of death
Danger of death from electrical voltage. Unplug the
dryer before working on it.
1. Open the door, let the dryer cool down (if necessa
ry). The arrow indicates the position of the bulb.
2. Undo the light cover bolt in the direction of the ar
row. Fold out the light cover through 90º. If the co
ver is stuck, insert a flat tool (e.g. a screwdriver)
into the opening slot and carefully lever it out.
i The light cover is attached and will not fall off.
3. Unscrew the bulb in the direction of the arrow.
4. Screw in the new bulb in the opposite direction to
the arrow.
5. Screw the light cover back on carefully (using mo
derate force).
d
Do not use a power screwdriver.
d
Do not use appliances with open, faulty or
missing light covers.
0.
33