Table of Contents
Advertisement
What to do if ...
The drum lighting is not
working.
The contents did not dry
or the drying time was
too long.
t
l
36
Cause
The bulb is faulty.
The condenser unit is clogged.
The filter is blocked.
The water container is full.
Water is not draining.
Ambient temperature above 30 ºC.
The ventilation grille is obstructed.
The wrong programme was
selected.
The appliance was installed in too
small a space.
A power failure of more than two
hours.
Solution
Change the bulb (see page 33).
Clean the condenser unit
(see page 32).
Clean the filter (see page 30).
Empty the container (page 31).
Check the water drainage
(if applicable).
Ensure sufficient ventilation.
Keep the ventilation grille clear.
Use the table of programmes to
help you select the correct
programme (see page 16 onwards).
Ensure that cold air can circulate.
Restart the programme.
Hide quick links:
Advertisement
Table of Contents
