Table of Contents
Advertisement
Electrical
connection
40
Caution:
The dryer must be connected correctly to an A.C.
contactor socket.
The mains voltage must comply with the voltage infor
mation given on the identification plate (on the rear of
the unit).
The connected load and the necessary fusing are
shown on the identification plate.
The dryer can be modified to suit the existing fusing
(see page 47).
Ensure that:
- the plug and the socket are compatible.
- the wire cross section is sufficient.
- the earth system is installed in accordance with
regulations.
If the mains cable needs altering, this should only be
done by the after sales service.
Do not use multiple plugs/connectors and/or exten
sion cables.
Only use current operated circuit breakers which are
marked as follows: 7.
Do not touch the plug with wet hands.
Always pull the plug grip to remove the plug from the
socket.
Hide quick links:
Advertisement
Table of Contents
