Rear Hard Top Installation; Door Frame - Jeep Wrangler 2009 Owenrs Manual

122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Rear Hard Top Installation

NOTE: If the door frames are installed from soft top
usage, they must be removed prior to installation of the
hard top.
1. Inspect the hard top seals for damage and replace if
necessary.
2. Install the hard top using the same steps for removal
in reverse order.
NOTE: Make sure that the hard top is sitting flush with
the body at the sides and check to ensure that there is a
uniform gap between the lift glass and hard top.

DOOR FRAME

WARNING!
• Do not drive your vehicle on pavement with the
door frame(s) removed as you will lose the protec-
tion that they can provide. This procedure is
furnished for use during off-road operation only.
• Do not drive your vehicle on public roads with the
doors removed as you will lose the protection that
they can provide. This procedure is furnished for
use during off-road operation only.
CAUTION!
Failure to follow these cautions may cause interior
water damage, stains or mildew:
• Opening a door or lowering a window while the top
is wet may allow water to drip into the vehicle's
interior.
(Continued)