Jeep Wrangler 2009 Owenrs Manual page 222

220 UNDERSTANDING YOUR INSTRUMENT PANEL
SCAN Button
Pressing the SCAN button causes the tuner to search for
the next listenable station in AM, FM or Satellite (if
equipped) frequencies, pausing for five seconds at each
listenable station before continuing to the next. To stop
the search, press the SCAN button a second time.
Voice Recognition Button uconnect phone — If
Equipped
Press this button to operate the uconnect phone feature
(if equipped). Refer to "uconnect phone" in Section 3.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a "Not Equipped With
uconnect" message will display on the radio screen.
Phone Button uconnect phone — If Equipped
Press this button to operate the uconnect phone feature
(if equipped). Refer to "uconnect phone" in Section 3.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a "Not Equipped With
uconnect" message will display on the radio screen.
TIME Button
Press the TIME button to alternate display of the time
and radio frequency.
Clock Setting Procedure
1. Press and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/
SCROLL control knob.
3. After adjusting the hours, press the right side TUNE/
SCROLL control knob to set the minutes. The minutes
will begin to blink.
4. Adjust the minutes using the right side TUNE/
SCROLL control knob. Press the TUNE/SCROLL control
knob to save the time change.