Automatic Unlock Doors On Exit - Jeep Wrangler 2009 Owenrs Manual

Automatic Unlock Doors On Exit

The doors will unlock automatically on vehicles with
power door locks if:
1. The "Automatic Unlock Doors On Exit" feature is
enabled.
2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).
3. The transmission shift lever is in NEUTRAL or PARK.
4. The driver door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33
Automatic Unlock Doors on Exit Programming
The "Automatic Unlock Doors On Exit" feature can be
enabled or disabled as follows:
1. Close all doors and place the key in the ignition.
2. Cycle the ignition switch between LOCK and ON and
then back to LOCK four times ending up in the LOCK
position.
3. Depress the power door unlock switch to unlock the
doors.
4. A single chime will indicate the completion of the
programming.
5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Use the "Automatic Unlock Doors On Exit"
feature in accordance with local laws.
2