Jeep Wrangler 2009 Owenrs Manual page 92

90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
1. Remove the three rear subwoofer (if equipped)
mounting nuts using a 15 mm socket.
Subwoofer
2. Unplug the electrical connector from the rear sub-
woofer (if equipped).
3. Fold the rear seat forward following steps 1 through 3
under "Fold and Tumble Rear Seat" in this section.
4. Press down on the release bar on each side, and pull
the seat out and away from the lower bracket.
5. Remove the seat from the vehicle.
Release Bar Location