Mounting Instructions - D-Link DCS-5009L User Manual

Section 2 - Installation
To mount your camera on a wall or ceiling, please follow the steps below.
Place the mounting bracket where you want
to position the camera and use a pencil to
mark the holes.
Use appropriate tools to drill two holes the
same diameter as the plastic anchors. After
drilling the holes, insert the plastic anchors
to support the screws.
If desired, the power and Ethernet cables
can be concealed behind the mounting
bracket. Run the cables through the back of
the mounting bracket, securing them with
the built-in guides. Be sure to leave enough
cable length protruding from the top to
allow connection to the camera.
D-Link DCS-5009L User Manual

Mounting Instructions

It is suggested that you configure the camera
before mounting.
1
2
3
Fasten the mounting bracket to the wall using
the screws provided.
Do not overtighten the screws as this may
crack the mounting bracket.
Using the supplied thumbscrew, fasten the
camera to the mounting
Connect the power and Ethernet cables to the
camera.
Adjust the angle of the arm on the
mounting bracket as required. Tighten the
thumbscrew to lock the arm in place.
4
5
bracket.
6
18