Control Panel & Features - Maytag Electric and gas dryer Use And Care Manual

Electric or gas dryer
Table of Contents

Advertisement

Available languages

Available languages

CONTROL PANEL & FEATURES
1
1
1
TEMPERATURE
Select a drying temperature based on the fabrics in your load. If
you are unsure of the temperature to select for a load, select the
lower setting rather than the higher setting.
SIGNAL
2
The Signal produces an audible sound when the drying cycle
is finished. Promptly removing clothes at the end of the cycle
reduces wrinkling.
Turn the SIGNAL knob to select the desired setting (Off, Low,
or High).
CYCLE KNOB
3
Use Cycle Knob to select available cycles on your dryer. Turn
the knob to select a cycle for your laundry load. See "Cycle
Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
AIR ONLY
No heat drying.
SENSOR DRY
Senses moisture in the load or air temperature and shuts off
when the load reaches the selected dryness level. Gives the
best drying in the shortest time. Drying time will vary based
on fabric type, load size, and dryness setting.
2
2
Not all features and options are available on all models.
Appearance may vary.
3
3
Steam Refresh (steam models only)
This cycle is best for reducing wrinkles and odors from dry
items. Cycle time will increase depending on number of
items.
4
WRINKLE PREVENT or WRINKLE CONTROL
Feature (depending on model)
The WRINKLE PREVENT or WRINKLE CONTROL feature
will run after your drying cycle is complete. It periodically starts
and stops the dryer, tumbling the load without heat to help
avoid wrinkling.
WRINKLE PREVENT/CONTROL automatically starts at the
end of the cycle. Opening the door will stop this feature.
Get up to 120 minutes of heat-free, periodic tumbling
at the end of a cycle. Turn the WRINKLE PREVENT or
WRINKLE CONTROL knob to OFF, ON, 60 min., or 120
min. (depending on model) at any time before the cycle has
ended.
NOTE: A signal will sound periodically when the WRINKLE
PREVENT or WRINKLE CONTROL setting is selected, but
only if the Signal is also selected.
5
PUSH TO START
Press the PUSH to START knob to start the dryer.
4
5
4
5
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bravos mct

Table of Contents